General Information; Safety Instructions - Honeywell Home CBU142 Einbauanleitung

1

General information

1.1 Basic Principles
The manual is a part of the series and the versions as
mentioned on the title page. The manual describes the safe
and proper use in all modes of operation.
The manual describes the safe and proper use in all modes
of operation.
The type label indicates the series and size, the most
important operating data and the order number. The factory
number/serial number describes the identifies the system
uniquely and serves this purpose for all further business
transactions.
1.2 Installation of the incomplete
machine
For installation of incomplete machines, refer to the
respective chapter Maintenance.
1.3 Target group
Target group for the operating instructions is technical trained
personnel.
1.4 Other applicable documents
Documents
Supplier documentation
1.5 Safety instructions in this manual
DANGER!
Places with this sign signify that death, severe
bodily injury or significant property damage will
occur if the appropriate precautionary measures
are not followed!
WARNING!
Places with this sign signify that death, severe
bodily injury or significant property damage may
occur if the appropriate precautionary measures
are not followed!
CAUTION!
Places with this sign signify that small bodily injury
or slight property damage may occur if the
appropriate precautionary measures are not
followed!
DANGER!
General danger zone
In combination with a signal, this symbol indicates
danger of death or injury.
Contents
Operating manuals and
further documentation of
auxiliary equipment and
integrated machine parts
GB
HAZARDOUS VOLTAGE!
Hazardous voltage
In combination with a signal, this symbol indicates
danger of injury from electrical voltage and
information for protection of electrical voltage.
CAUTION!
Machinery defect
In combination with the signal CAUTION, this
symbol indicates danger of the machine and its
functions.
2

Safety instructions

2.1 General comments
• The operating manual includes basic instructions for
assembly, operation and maintenance. They ensure
safe handling and avoids personal injuries or property
damage
• Observe all safety instructions.
• Before assembly and start-up, the manual has to be
read by the operator as well as by the responsible
technical/operating personnel and has to be stored at
the site of the compact booster unit at all times.
• This operating manual must always remain accessible
at the plant.
• Instructions and markings that are directly attached to
the product have to be observed and must be kept
completely legible. This applies for example to:
• Arrow for flow direction
• Connection labels
• Identification plate
2.2 Intended use
The compact booster unit may only be operated in such areas
as described in the other applicable documents.
• Operate the compact booster unit only if it is in perfect
working condition.
• Do not operate the compact booster unit if it is only
partially assembled.
• The compact booster unit may only be used to pump
the medium as described in the documentation of the
respective version.
• Never operate the compact booster unit without pump
medium.
• Observe the values for minimum pumping rates
(avoiding damage because of overheating, storage
damage, ...).
• Observe the values for maximum pumping rates (to
avoid damage due to overheating, floating ring seal
damage, cavitation damage, storage damage, ...).
• Do not throttle the input of the compact booster unit (to
avoid cavitation damage).
2 MU0H-1382 GE23R0819