Replacement Parts - nomad 18 VOLT Bedienungsanleitung

PROBLEM POSSIBLE REASON
(If using 1. Poor power connection.
power cord) 2. Power switch off.
Power port
inactive or
3. No power at vehicle outlet.
no power to
the unit.
4. Power cord fuse open.
5. Vehicle fuse open.
6. Thermal protector triggered.
7. Power cord damaged.
(If using 1. Battery is not secured.
battery
pack)
Motor
2. Battery is not charged.
fails to
start when
switch
trigger is
depressed.
ANY OTHER SERVICING SHOULD BE DONE BY AN AUTHORIZED SERVICE REPRESENTATIVE
Costs of any transportation to and from any place of repair are to be paid by the owner. The service
parts used in this unit are easily replaced and readily available from TTL. Always identify your
cleaner by the model number and manufacturing code when requesting information or ordering

replacement parts.

Cap Assembly........................................................................................ 2-COR400-X00
Hose Assembly ...................................................................................... 2-COR560-X00
Filter Sock, Tank .................................................................................... 1-COR215-X00
CUSTOMER SERVICE (nomad2go@tti.com.hk)
REPLACEMENT PARTS
21
POSSIBLE SOLUTION
1. Check the LED light in the
adaptor to see if it is lit.
2. Make sure power switch is in the
ON position.
3. Check the vehicle owner's
manual to determine when
power is available. Some vehicle
ignitions may need to be turned
to accessory position to provide
power to the power ports.
4. Replace fuse.
5. Check vehicle owner's manual
for replacement instructions.
6. Allow unit to cool.
7. Please contact nomad2go@tti.
com.hk for service instructions.
1. To secure the battery pack,
make sure the latches on each
side of the battery pack snap into
place.
2. Charge the battery pack accord-
ing to the instructions included
with your model.