Panasonic JS-970 Series Handbuch Seite 35

5
Hold a new display unit being mounted with both
hands, align it to holes in the VESA mount section of
the stand, and insert the engagement section on the
back side of the display unit.
Slide the display unit toward you (downward).
● Slightly move the display unit up / down / right /
left to ensure that it fits securely into the VESA
mount section.
6
Temporarily secure the DCIN cable and other cables
for connecting peripheral devices, which are passing
out through the stand, with the cable clamps and
thumbscrews you have removed in step 3.
● Be sure to use hand when tightening the
thumbscrews.
7
Connect the DCIN cable and the other cables for
peripheral devices to the display unit.
To prevent the cables from interfering with your work
to secure the cable cover, adjust the length of each
cable and firmly tighten the thumbscrews.
● Be sure to use hand when tightening the
thumbscrews.
35