NGS Home N-Cut Sixinone Gebrauchsanweisung Seite 15

Nose and Ear Hair Cutter
Nose Hair Cutting
1 Ensure that the nostrils are clean.
2 Place the nose, ear and eyebrow hair cutter header (Accessory
O: Infive) following header change instructions. You will hear a
"click" when the header is correct fitted (see figure 11).
3 Switch on the device and carefully introduce it in the front of
your nostrils (fig. 12).
WARNING: Do not introduce the device in nostrils more than
5 mm.
4 Move the device slowly in and out performing a smooth circular
movement.
5 Switch off device.
6 Clean accessories after each use.
Ear Hair Cutter
1 Ensure that the ears are clean and wax free.
2 Place the nose, ear and eyebrow hair cutter (Accessory O;
Infive) following header change instructions. You will hear a
"click" when the header is correct fitted (see figure 11).
3 Switch on the device and carefully introduce it in the outer part
of the ear moving it carefully.
WARNING: Do not introduce the device in the hearing canal
more than 5 mm; it could case irreparable damages.
4 Switch off device.
5 Clean accessories after each use.
EN
FR
ES
DE
IT
P