NGS Home N-Cut Sixinone Gebrauchsanweisung Seite 12

Beard and moustache hair cutting
1 Insert the Accucontrol header (Accessory D; Inthree) in the main
header (accessories C and B; Inone) until you hear a "click", as
indicated in figure 4.
2 Select cutting length.
See table 1 on lengths.
If this is the first time you use the device we recommend
selecting the cutter guide that provides the longest length, to
adjust the length while you familiarize yourself with the device
The main header (accessory C and B) does not allow
Notes
Not all hair grows in the same direction therefore it shall
be necessary to cut hair in different directions; upwards,
downwards and from one side to another.
selecting cutter length, performs a total shaving of beard and
moustache.
3 Switch on the hair cutter.
4 Start cutting hair in the direction opposite to its growth. Ensure
the ends of the blade are placed over the root of the hair (fig. 6).
It is advisable to remove, during the process, hair accumulated
in the teeth of the blades. We recommend the use of the cleaner
brush for this purpose.