NGS Home N-Cut Sixinone Gebrauchsanweisung Seite 13

Accucontrol header (cutter guide) is NOT required in the
following cases:
• To define hair lines.
• To cut hair on neck or back of neck.
• To individually remove undesired hair.
Warning
In the event of detecting some damage or anomaly, do not use
the microshaver until repaired or swap.
In these cases replace the Accucontrol header (fig. 7) with the
precision trimmer (Accessory B). See figure 8.
To DEFINE BEARD, MOUSTACHE or SIDEBURN cutting lines
use the accessory header for neck or sideburn depending on
requirements.
(Accessory A; Insix). See figure 9.
To DEFINE shaving lines use the microshaver (Accessory P; Intwo).
See figure 16.
During usage, maintain the microshaver in direct contact
with the skin but without pressing too hard; contact must be
smooth.
EN
FR
ES
DE
IT
P