Fm Radio - auna NR-620 DAB Bedienungsanleitung

FM RADIO

Connection
1. Connect the power cord (25) to AC outlet.
2. Press the Power on/off / Function button (13) once and the LCD display
(2) with blue backlight on.
3. Then press the Function button (13) to FM (Tuner) mode. If sound is
coming out from the speaker, it means the tpower supply is normal.
Now your system is ready to play the music.
Listening to DAB/FM radio
Getting started
• Connect the DAB/FM antenna to the DAB/FM antenna socket (22) at the
back of the unit and extend it for the best reception
• Press the Power on/off / Function button (13) to turn on the unit and
press the button again to switch the function to DAB/FM mode.
FM radio - Auto scan
1. Switch the function to FM mode.
2. Press the "scan" button (4) once, the unit will auto-search the nearest
available FM station forward and stop.
3. Press the "scan" button again to auto-search to the next available FM
station forward and stop.
4. Press and hold the "scan" button for 2-3 seconds, the unit will auto-
search the nearest available FM station backward and stop.
5. Adjust the volume knob (9) to the desire volume level.
FM radio - Manual tuning
1. Turn the "Select/Enter" knob (3) to tune to the desired station
manually.
2. Adjust the volume knob (9) to the desire volume level.
FM & FM-Stereo reception
• The unit will default the FM mode at Auto. Meaning if the reception is
strong, the FM signal will be received in stereo signal. Otherwise, the
FM signal will be received in mono only.
• During tuner mode, press the Play/pause/Enter button on the remote
control once, and you can switch to mono/auto FM mode.
• In particular when stereo signals are weak, it is preferable to receive the
program in Mono.
EN
29