Keeping Your Shaver In Top Shape; Environmental Notice - Braun 5742 Handbuch

used provided it contains no particles or abrasive substances. Rinse off all
foam and let the shaver run for a few more seconds.
• Next, switch off the shaver and press the foil release buttons (3). Remove the
shaver foil and the cutter block. Then leave the disassembled shaving parts to dry.
Alternatively, you may clean the shaver using the brush provided:
• Switch off the shaver. Remove the shaver foil and tap it out on a flat surface.
Using a brush, clean the inner area of the shaver head. However, do not clean
the shaver foil nor the cutter block with the brush as this will damage them.

Keeping your shaver in top shape

If you regularly clean the shaver under water, then once a week apply a drop of
light machine oil onto the long hair trimmer and shaver foil.
Preserving the batteries
In order to maintain the optimum capacity of the rechargeable batteries, the
shaver has to be fully discharged (by shaving) every 6 months approximately.
Then recharge the shaver to full capacity.
Replacing the shaving parts
To maintain 100% shaving perform-ance replace your foil and cutter block at
least every 18 months or when worn. Change both parts at the same time for a
closer shave with less skin irritation.
(Shaver foil and cutter block: 30B)

Environmental notice

Product contains batteries and/or recyclable electric waste. For
environment protection do not dispose of in household waste, but
for recycling take to electric waste collection points provided in your
country.
Subject to change without notice.
Electric specifications see printing on the special cord set.
10
97143960_199s-195s-1_S4-58.indd 10 97143960_199s-195s-1_S4-58.indd 10
VED Effective Date 10Nov2014 GMT - Printed 29Sep2015
30.10.14 11:11 30.10.14 11:11