Pedal; Prog; Edit Mode - IK Multimedia iRig Keys Pro Handbuch

English
Most instruments use this message to control the amount of vibrato or tremolo in the sound, but note that this
depends solely on how the receiving instrument itself is programmed and not on the iRig KEYS PRO settings.

Pedal

3
iRig KEYS PRO supports both Sustain Pedals and Expression Pedals. Connect a NORMALLY OPEN sustain
pedal to the jack BEFORE connecting iRig KEYS PRO to the iOS device or to the computer. When the pedal
3
is depressed, you will sustain all keyed notes until the pedal is released. iRig KEYS PRO sends MIDI CC#64 with
a value of 127 when the pedal is depressed and a value of 0 when released.
Connect a continuous expression pedal to the jack BEFORE connecting iRig KEYS PRO to the iOS device
3
or to the computer to control EXPRESSION on the sounds you're playing. iRig KEYS PRO sends MIDI CC#11
when the expression pedal is moved.

Prog

8
Sound modules like virtual instrument apps or plug-ins can switch sounds when they receive the Program
Change MIDI message. iRig KEYS PRO sends Program Changes by pressing the PROG up or down buttons.
8
Starting with the currently selected program, iRig KEYS PRO will send the next higher program numbers when
you press PROG UP and lower program numbers when you press PROG DOWN. To set the current program
see the chapter, "EDIT mode".

EDIT mode

iRig KEYS PRO allows you to customize most of its parameters to match any kind of need.
In EDIT mode you can:
• Set the MIDI Transmit Channel.
• Set different touch (velocity) sensitivities.
• Assign a specific MIDI Control Change number to the VOL/DATA knob.
• Send specific MIDI Program Change numbers and set the current program number.
• Send "All Notes Off" MIDI message.
• Transpose the keyboard in semitones.
• Reset a specific SET to factory state.
To enter in EDIT mode, press both OCT buttons .
7
Both OCT buttons will light up to indicate EDIT mode.
You can exit EDIT mode at any time by pressing the C2 key marked "CANCEL/NO".
Please refer to the user manual of the control app for detailed information on this. From the app you'll also be
able to select which MIDI messages the external pedals will send.
12