ASROCK 4Core1333-FullHD Schnellinstallationsanleitung Seite 24

1. High Definition Audio supports Jack Sensing, but the panel wire on the
chassis must support HDA to function correctly. Please follow the
instruction in our manual and chassis manual to install your system.
2. If you use AC'97 audio panel, please install it to the front panel audio
header as below:
A. Connect Mic_IN (MIC) to MIC2_L.
B. Connect Audio_R (RIN) to OUT2_R and Audio_L (LIN) to OUT2_L.
C. Connect Ground (GND) to Ground (GND).
D. MIC_RET and OUT_RET are for HD audio panel only. You don't
E. Enter BIOS Setup Utility. Enter Advanced Settings, and then select
F. Enter Windows system. Click the icon on the lower right hand
System Panel Header
(9-pin PANEL1)
(see p.2, No. 16)
Chassis Speaker Header
(4-pin SPEAKER 1)
(see p.2, No. 20)
Chassis Fan Connector
(3-pin CHA_FAN1)
(see p.2, No. 21)
CPU Fan Connector
(4-pin CPU_FAN1)
(see p.2, No. 5)
2 4 2 4 2 4 2 4 2 4
need to connect them for AC'97 audio panel.
Chipset Configuration. Set the Front Panel Control option from
[Auto] to [Enabled].
taskbar to enter Realtek HD Audio Manager.
®
For Windows 2000 / XP / XP 64-bit OS:
Click "Audio I/O", select "Connector Settings"
"Disable front panel jack detection", and save the change by
clicking "OK".
® TM TM
For Windows Vista / Vista
Click the right-top "Folder" icon
panel jack detection", and save the change by clicking "OK".
4
3
2
1
ASRock 4Core1333-FullHD Motherboard
, choose
64-bit OS:
, choose "Disable front
This header accommodates
several system front panel
functions.
Please connect the chassis
speaker to this header.
Please connect the chassis fan
cable to this connector and
match the black wire to the
ground pin.
Please connect the CPU fan
cable to this connector and
match the black wire to the
ground pin.