Beware Of Condensation; Cleaning The Unit; Bluetooth® Overview; Transmission Conditions - Tascam VL-S3BT Bedienungsanleitung

Beware of condensation

Condensation could occur if the unit is moved from
a cold place to a warm place, it is used immediately
after a cold room has been heated or it is otherwise
exposed to a sudden temperature change.
To prevent this, or if this occurs, let the unit sit for one
or two hours at the new room temperature before
using it.

Cleaning the unit

Use a dry soft cloth to wipe the unit clean. Do not
wipe with chemical cleaning cloths, thinner, alcohol
or other chemical agents. Doing so could damage the
surface or cause discoloration.
Bluetooth® overview
This unit has a built-in Bluetooth audio receiver,
allowing it to output the audio playback of a
computer or portable audio device that supports
Bluetooth.
CAUTION
Operation and connection of this unit's
Bluetooth functions with all Bluetooth devices
are not guaranteed.

Transmission conditions

This is a Class 2 Bluetooth transmission output device.
It has an approximate transmission range of 10 m,
but this distance can vary due to the interference of
obstacles and electromagnetic waves.
An obstacle between this unit and another Bluetooth
device could interfere with Bluetooth transmission. If
this occurs, remove the obstacle. Moreover, the use of
a wireless LAN (IEEE802.11b/g) or microwave oven in
the same operating environment could also interfere
with Bluetooth transmission. If this occurs, stop using
that equipment or move this unit and the Bluetooth
device at least 10 m away from it.

Profiles

This unit supports the following Bluetooth profile.
• A2DP (Advanced Audio Distribution Profile)
Bluetooth devices must support A2DP in order to
transmit audio via Bluetooth.
Even if they have the same Bluetooth profile,
however, different Bluetooth devices can have
different functions depending on their specifications.

Codecs

This unit supports the following A2DP codecs and
automatically selects one of them during audio
transmission.
• SBC
• AAC
• Qualcomm®aptX ™ audio
It will select the appropriate codec to use according
to the codec support of the Bluetooth device and
transmission conditions.
NOTE
You cannot use buttons, for example, to select
the codec.
Due to the nature of Bluetooth wireless
technology, playback from this unit will start
slightly later than when triggered from the
Bluetooth device.

Content protection

This unit supports SCMS-T content protection
during audio transmission, enabling the playback of
protected audio.

Transmission security

This unit supports security functions during
Bluetooth transmission according to the Bluetooth
standards, but the invisibility of transmission is not
guaranteed.
Our company will take absolutely no responsibility if
data is leaked during Bluetooth transmission.

Using the TEAC Global Site

You can download updates for this unit from the
TEAC Global Site:
http://teac-global.com/
In the TASCAM Downloads section, select the desired
language to open the Downloads website page for
that language.

Product registration

Customers in the USA, please visit the following
TASCAM website to register your TASCAM product
online.
http://tascam.com/
7
TASCAM VL-S3BT