Switching The Input Source; Playing Back From A Bluetooth Device; Pairing - Tascam VL-S3BT Bedienungsanleitung

Switching the input source

You can select whether the audio this unit outputs
is the audio from a line input (RCA pin input jacks
or stereo mini input jack) or the audio received by
Bluetooth.
Press the Bluetooth PAIRING button to switch
between the input sources.
8 When a line input source is selected
Indicator
STANDBY/ON indicator
Bluetooth indicator
8 When a Bluetooth input source is selected
Indicator
STANDBY/ON indicator
Bluetooth indicator
CAUTION
When switched to Bluetooth input, if no
Bluetooth device is paired and connected, the
Bluetooth indicator will blink, showing it is
ready for pairing.
10
TASCAM VL-S3BT
Lighting
Lit
Unlit
Lighting
Lit
Lit
Blinking
Playing back from a Bluetooth
device
These speakers can output the audio playback of
devices that support Bluetooth (A2DP), including
computers and portable audio devices.

Pairing

Follow the procedures below to pair with the
Bluetooth device in order to communicate with it.
NOTE
Pairing also requires setting the Bluetooth
device.
For details about how to do this, refer to the
operation manual of that Bluetooth device.
1. Press the Bluetooth PAIRING button on the
speaker.
The Bluetooth indicator flashes, showing that
pairing is possible.
2. On the other Bluetooth device, select "VL-S3BT"
(this speaker).
After pairing succeeds, the Bluetooth indicator
stops blinking and stays lit, showing that
connection with that device is complete.