Ending A Paired Connection; Troubleshooting - Tascam VL-S3BT Bedienungsanleitung

Ending a paired connection

Follow the procedures below to end a paired
connection from this unit.
Press and hold the Bluetooth PAIRING button
1.
for at least two seconds.
2. The Bluetooth indicator blinks, showing that
the paired connection has ended and pairing is
possible again.

Troubleshooting

If you are having trouble with the operation of this
product, please try the following before seeking
repair.
If these measures do not solve the problem, please
contact the store where you bought the unit or
TASCAM customer support service.
8 The speakers will not turn on.
• Confirm that the included AC adapter
(PS-P1524E) is securely connected to both the
outlet and the DC connector.
8 No sound is output.
• Check the connection with the playback device
again.
• Check the VOLUME knob.
8 The sound drops out or there is noise.
• Confirm that the connection cables do not have
contact issues.
• Is a wireless LAN, other Bluetooth device,
microwave oven or similar equipment nearby?
Keep those devices at a distance whenever
possible.
• Keep the Bluetooth device close to these
speakers when using them together. Try
changing the location of the Bluetooth device or
the speakers.
• If applications other than the audio playback app
are running on a smartphone, the sound could
drop out. In this case, stop applications other
than the audio playback app from running.
8 Cannot connect or communication is
interrupted.
• Confirm that the Bluetooth device power is on
and that its Bluetooth function is also on.
• Is the Bluetooth device too far away? Is there a
wall or other obstacle between the device and
the speakers?
If the Bluetooth device is behind the speakers,
the speakers themselves could block communi-
cation.
Try changing the location of the Bluetooth device
or the speakers.
• Turn the speakers STANDBY and ON again.
• Remove the VL-S3BT pairing from the other
Bluetooth device, and follow the procedures in
"Pairing" on page 10 again.
8 Pairing is not possible.
• Confirm that the connected Bluetooth device
supports A2DP.
• Confirm that the Bluetooth device that you
want to connect is in a state that allows it to
communicate. For details, check the operation
manual of that Bluetooth device.
• Turn the power off for both the speakers and
the Bluetooth device. Turn them both on and try
pairing them again.
• Turn off Bluetooth devices other than the one
that you are trying to pair to the speakers.
• Remove the VL-S3BT pairing from the other
Bluetooth device, and pair them again.
11
TASCAM VL-S3BT