Inhaltsverzeichnis
Werbung
External Sensor
Stopping
CAUTION
CAUTION
CAUTION
Thermo Scientific
(Optional) Once the external sensor cable is connected to the chiller,
enable or disable the sensor by pressing
alternates with
keys to change the status and then press
display. See Chapter 3 for additional information.
To turn the chiller off, press
When the display goes blank it is safe to place the circuit protector located
on the rear of the chiller to the down position.
Using any other means to shut the chiller down can reduce the life
of the compressor.
The circuit protector located on the rear of the chiller is not intended
to be used as a disconnecting means.
Always turn the chiller off and disconnect it from its supply voltage
before moving it.
a fifth time. The display
and either
or
. If desired, use the arrow
to return to the temperature
.
Chapter 2
Merlin 2 - 9
Werbung
Inhaltsverzeichnis
