Inhaltsverzeichnis
Werbung
Chapter 2
2 - 6
Merlin
NOTE The following indications are not visible until
Indicates the controller is displaying the setpoint. Adjust the display
value using the arrow keys.
NOTE You cannot adjust the setpoint closer than 2°C to either of the
temperature limits discussed below.
Indicates the controller is displaying the low temperature alarm
setting. The indicator flashes and the alarm sounds if this limit is
exceeded. Adjust the display value using the arrow keys.
Indicates the controller is displaying the high temperature alarm
setting. The indicator flashes and the alarm sounds if this limit is
exceeded. Adjust the display value using the arrow keys.
(Optional) Indicates the unit is in the remote/serial communication
mode of operation. The indicator flashes if the unit is in the remote
start/stop mode of operation. Toggle between the local and remote
modes using the arrow keys.
NOTE For all four indicators, if neither arrow key is pressed within 10
seconds the display will return to the recirculating temperature display. Save
any change using
within 60 seconds the display will return to the recirculating temperature
display and ignore any change.
. After pressing an arrow key, if
is depressed.
is not pressed
Thermo Scientific
Werbung
Inhaltsverzeichnis
