Using The Lcd Monitor - Toshiba PDR-M11 Bedienungsanleitung

Photography (Auto Photography) (continued)

Using the LCD Monitor

Get ready to take the photograph.
Load the batteries (
Set the mode dial to [
Look at the image on the LCD monitor to compose the picture.
Press the shutter button down halfway 1 , and press
it down fully 2 .
• Pressing the shutter button down halfway adjusts the focus and
exposure, and pressing the shutter button down fully takes the
shot.
• When AF or AE is activated, the viewfinder lamp lights (
39). When the focus and exposure are adjusted, the viewfinder
lamp turns off.
• After you have taken a picture, a preview image is displayed on the
LCD monitor for more than two seconds.
• The viewfinder lamp lights while image data is being recorded onto
the SmartMedia™.
Memo
• The LCD monitor sometimes displays bright, dark or colored spots at all times. This is not a malfunction.
These spots do not appear in the photographed image.
• The image is not displayed on the LCD monitor while the shutter button is pressed down fully.
36-50 PDRM11-E
Page 23) and the SmartMedia™ (
].
- 42 -
42
Page 29) into the camera.
Press down
1
halfway.
Press down
2
fully.
Page
01.6.28, 10:17 AM