Steam Ironing - Jata electro PL615C Bedienungsanleitung

• When you have finished ironing, always empty the water from
the iron.
• Don't allow children play with the appliance. Keep the
appliance out of the reach of children.
• When connected to the mains or cooling down, hold the steam
iron and the cable cord out of the reach of children under 8
years old.
• VERY IMPORTANT: Never immerse the appliance in water
or any other liquid.
• You may get some smoke and/or smells during the first few
uses. This is completely normal in this kind of appliances.
• During the first use it is possible that the products used in the
manufacturing process of the appliance may contaminate the
steam. We recommend that you allow the steam to flow for a
few minutes before starting to iron.
• It there still rests of water in the tank, it is due to the quality
controls made in our production line.
• The cleaning and maintenance done by users, can not be done
by children without any supervision.
• If the cable were to deteriorate it must be changed by an
Authorised Service Centre.
INSTRUCTIONS OF USE
WIRELESS IRONING
• The iron has the option to be used with or without cable.
• To iron without cable, press the wireless pushers (11) placed in the lateral sides of the removable base (10)
and remove the iron.
• The iron will be switched off and the maintenance of the temperature is limited therefore to follow ironing
without cable, you must connect the iron again into the base (10) Fig 1. and wait till reaching again the correct
temperature to iron again without cable.

STEAM IRONING

• Set the temperature selector (8) to its maximum position (max) by turning it clockwise.
• Before filling the tank with water, set the adjustable steam knob (4) to the off position (0).
• To fill the tank, always do so with the iron unplugged from the mains.
• Open the filling lid (5) and pour water into the tank using the cup provided.
• Do not go over the MAX. indication of the tank (12) to avoid overflowing.
• Replace the lid.
• Plug the iron into the mains. The indicator (1) will light on.
• Once the pilot light (1) goes off, turn the steam knob (4) to the maximum steam indication ( ) until getting
the desired amount of steam.
SUPER STEAM
• The temperature selector (8) must always be set to its maximum position (max).
• Press and release the button (3). Repeat this operation at intervals between each time you press the button.
• If you wish to obtain a greater super-steam, do not press more than 3 consecutive times after the pilot light
(1) is off.
11