2.3 INSTAL THE ARM
M8x25
4,8x13
2.4 ALIGN THE ARM
Give the "START" command
to position the arm holder
horizontally
USE THE ADJUSTABLE ARM HOLDER
TO ALIGN THE ARM WITH THE ROAD.
Give the "START" command
to position the arm holder
vertically
2. Installation
M8
M8x35
Ø8
Ø8
Electrically connect the control unit (see point 2.7)
Adjustable arm holder
2x13 mm
ADJUST THE VERTICAL BAR BY
TURNING THE OPENING LIMIT
SWITCH CAM.
M14x70
Ø14
Ø6x12
M8
Ø8
Ø14
M14
TIGHTEN 135Nm
Opening
microswitch cam
3 mm
- 11 -
Check that the bar is
in horizontal position
Check that the bar is
in vertical position
EN