Klarstein 10034566 Bedienungsanleitung Seite 25

• The maximum amount of flour is 480 g (3 CUPS), the added amount of water 190
ml (±10 ml deviation depending on flour moisture).
• The minimum amount of flour is 160 g (1 CUP), the added water is
• Water volume 80 ml (±5 ml deviation depending on flour moisture).
• Always add the recommended amount of flour and water. Otherwise, the noodles
are too dry or too wet, which may damage the unit.
• Do not knead the dough until you have ensured that flour and water have been
evenly mixed with the manual function. If the holes in the discs are blocked by dry
flour, they may be damaged.
Note: This product is equipped with an intelligent control program. It stops
automatically after the pasta is ready. If you wish to continue using the machine, wait
20-30 minutes for the motor to cool down.
Noodle production step by step
Make sure that the mixing
bowl and all associated
parts are assembled.
Measure the flour with the flour measuring cup. Use the
spatula to remove excess flour (B). Do not heap the flour
as shown in figure (A). Then measure the water with the
water measuring cup. Place the water measuring cup on
the table so that you can look at the scale from the front.
EN
25