Machine Characteristics - Silca POKER Handbuch

USE
The key-cutting machine must be installed and used in the way laid down by the manufacturer in the Operating Manual.
If the key-cutting machine is used differently or for
purposes different from those described in this manual,
the customer will forego any rights he may have over the
manufacturer. Furthermore, unforeseen danger to the
operator or any third parties may arise from incorrect use
of the machine.
Negligence in the use of the machine or failure on the
part of the operator to observe the instructions given in
the manual are not covered by the guarantee and the
manufacturer declines all responsibility in such cases.
Further risks
WARNING: as there is a danger of crushing from
some parts of the machine during key-cutting, keep
hands well away from the zone shown in Fig.1.
Protection and safety precautions for the
operator
Our key-cutting machines are designed with features
which make it completely safe in all its parts and are built
entirely to the Machine Directives.
The operations for which it has been designed are easily
carried out at no risk to the operator.
Observation of safety regulations and the instructions
provided by the manufacturer in this leaflet and the
Operating Manual eliminate all human errors, unless
deliberate.

MACHINE CHARACTERISTICS

Noise level
Noise pressure: Lp (A) =
Power supply
The machine is supplied with electricity by means of a separable earthed plug.
The key-cutting machine must be connected to a socket provided with a differential switch.
Start-up
The machine is started up by means of the master
.
switch
Machine Identification
The key-cutting machine is provided with an
identification label which shows the serial number.
Use the serial number when ordering spare parts
or requesting servicing.
TRANSPORT
Our key-cutting machines are easily transported by one or more persons (if the weight is over 25-30 Kg.) and is not
dangerous to handle.
Packing
Internally the packing comprises expanded polymer shells which enclose the
machine and its parts, holding them securely in place during handling.
A robust cardboard box and nylon wrapping give further protection to the
machine even for long storage periods.
Transport
The packing protects the machine from the risks of handling (knocks, etc.) and
is clearly marked with suitable symbols showing the ideal conditions for
transport.
84,29 dB (A) Noise potential: Lw (A) =
Fig. 2
Copyright Silca 1994
Fig.1
Fig.1
® SILCA SpA - Via Podgora 20 (Z.I.)
31029 VITTORIO VENETO (TV) ITALY
(
0438) 9136
Telefax (0438) 913800
Telex 410579 SILCA I
TIPO
TYPE
N° MATRICOLA
SERIAL No.
VOLT Hz. A. WATT
dB (A)
manufacturer's
identity
year of
manufacture
CE mark
Fig.3