Gibbon Series Features - Monkey Banana Gibbon Serie Bedienungsanleitung

GIBBON SERIES FEATURES

System
[1]
Designed as compact near fi eld monitor it allows to work in a very narrow triangle sweet spot to compensate
the lack of space most users are facing.
The Subwoofer Gibbon 10 is engineered to support the 2-Way Monitors of the Gibbon Family.
Low End Signals can often not be displayed on Nearfi eld 2-Way Monitors, integrating a subwoofer to the
Monitoring Setup will expand the frequency range at the low end and makes it easier to judge this frequency
range better. It is made for professional recording studios, project and home studios, broadcasting, video
cutting and editing environments, controlrooms, Surround Setups or high end hifi .
Gibbon 10 expand the Low Frequency range to give you a better image of your LF Mix during mixing sessions
and monitoring.
The studio monitor is equipped with a silkdome tweeter to guarantee stress less mixing sessions over a
long period. Gibbon series speakers integrates a magnetically shielded polypropylene Cone for Low Frequency
Response. The Gibbons are Bi-amped in Class A/B Design. HF as well as LF are supplied with Power from
separate Amplifi ers customized to reach the maximum performance of the tweeter and woofer.
FEATURES REAR PANEL
1. Vent Port
2. XLR Input(+4dBu):This input accepts XLR type connectors. Connect your audio interface, mixer, or other
line-level audio source to this input.
3. 6,3 mmTRS Input(+4dBu):This input accepts TRS 6,3mm type connectors. Connect your audio interfa-
ce, mixer, or other line-level audio source to this input.
4. RCA Input (-10dBv):The RCA input accepts unbalanced signals used to connect signals from unbalan-
ced -10dB devices.
5. Volume Knob: This knob adjusts the gain level. When operating the unit for the fi rst time, start with
the volume control set all the way off. Slowly raise the volume control to reach a comfortable listening
level.
6. HF Knob:10KHz +/-6dB adjustable.
7. LF Knob:100Hz +/-6dB adjustable.
8. Power Switch:This Switch powers on and off.
9. AC Inlet:This socket accepts a standard IEC-type power cable.
10. LED Logo : The Monkey Banan Logo will be lighted as soon a signal source is playing.
After 12 min without ( no signal is playing) the speaker turns into Standby Mode, the Logo will be
dimmed; the speaker is in "Jungle Protect" - according to [European Directive 2005/32/EG]. As soon
signal is played again the speaker turns immediately on, the Logo will be enlighted
11. AC Select: Ensure the voltage switch is in the right postition to deliver the voltage used in your country
12. Xover Frequency – Knob: With this knob you are able to adjust the Crossover frequency between 50Hz
and 120Hz.
13. XLR – Out: Connect these outputs with your Studio Monitors
14. TRS Out: Connect these outputs with your Studio Monitors
15. Sub Out: Connect this output with other subwoofers
16. Sub Bypass: Here you can connect your subwoofer with an optional footswitch to mute the subwoofer.
ATTENTION! Please do not connect audio signals with this input!
22
5
6
7
4
3
5
13
2
14
4
3
10
1
2
10
8
9
10
12
15
16
8
9
11
1
23