Brief Introduction; What's In The Box; Setting Up Yous System - Monkey Banana Gibbon Serie Bedienungsanleitung

BRIEF
INTRODUCTION
Thank you for choosing the Monkey Banana Gibbon Series professional Studio Reference Monitors.
In these pages, you'll fi nd a detailed description of the features of the Gibbon Series,
step-by-step instructions for its setup and use, and full specifi cations.
With proper care and adequate air circulation, your Gibbon Speaker will operate trouble free for
many years. We recommend you record your serial number in warranty card provided for future
reference.
Please register your serial number online: www.monkey-banana.de to receive full support.
The Gibbon Monitors were designed and tested by veteran audio engineers to meet your needs in a
studio monitoring environment. It focuses on the functional goal of delivering pure, original sound
without any additional coloration. The Gibbon Series monitor is self-powered, directly accepting a
signals from a variety of sources.
The Gibbon Monitors were designed to overcome all the limitations of conventional studio reference
monitors within the audio environment. This system delivers a wide-range frequency response by
employing two extraordinary drivers and unique crossover technology. It boasts a stable and balanced
low-mid frequency response along with a defi ned mid and high-frequency response as well. Both drivers
are magnetically shielded for desktop music production.

WHAT'S IN THE BOX?

• One Gibbon Series speaker
• One detachable AC power cord
• This manual
20
SETTING UP YOUR SYSTEM
1. For optimal performance of the Gibbon series, please read the following thoroughly and carefully prior
to installation.
2. Unpacking: Please do not touch the speaker cones. The Gibbon set is packaged in the box tightly, so
your attention is required when taking the monitors out of the boxes. To avoid possible damage to the
speaker units, hold both sides of the monitor in order to pull it out of the box. The speaker cones should
not be touched in order to avoid damage even after they are out of the box.
3. Placement: Placing the speakers is one of the most important procedures in order to monitor sound
accurately. To monitor with the Gibbon performing to their maximum capability, an appropriate lis-
tening environment and correct placement are required. Please refer to the following for correct Gibbon
placement.
XLR output
6,3mm output
RCA
21