Connecting A Pull Cord Switch - Fresh INTELLIVENT 2.0 Installationsanleitung

NB!
Use an ordinary round file to
create a smooth cut-out at
a suitable place in the front
cover.
Do NOT use pliers or similar
tools, as these may cause the
cover to crack.
5 Connecting the pull cord switch
A pull cord can be installed for activating the timer
manually or for pausing the fan. Remove the mounting
plate using a screwdriver, for example, and thread the
accompanying pull cord through the hole.
• Once installation is complete, push the safety switch
down to position I – ON, to make the fan active again.
When the fan is connected to the power supply, it performs a
self-test where electronics, LEDs and operation of the motor
are all tested. The fan is now ready for use.
8