Cleaning And Maintenance; Technical Specifications - HQ Power VDL301GL Bedienungsanleitung

7. Cleaning and Maintenance

1. All screws should be tightened and free of corrosion.
2. The housing, visible parts, mounting supports and the installation location (e.g. ceiling, suspension, trussing)
should not be deformed, modified or tampered with e.g. do not drill extra holes in mounting supports, do not
change the location of the connections.
3. Moving mechanic parts must not show any signs of wear and tear.
4. The electric power supply cables must not show any damage. Have a qualified technician maintain the device.
5. Disconnect the device from the mains prior to maintenance activities.
6. Wipe the device regularly with a moist, lint-free cloth. Do not use alcohol or solvents.
7. There are no user-serviceable parts.
8. Contact your dealer for spare parts if necessary.

8. Technical Specifications

Power Supply
Laser
Power
Colour
Wavelength
Source
Scanning Speed
Scanning Angle
Control Mode
Power Consumption
Fuse
Dimensions
Total Weight
Max. Ambient Temperature
Max. Housing Temperature
Use this device with original accessories only. Velleman nv cannot be held responsible in the event of
damage or injury resulted from (incorrect) use of this device. For more info concerning this product, please
visit our website www.hqpower.com. The information in this manual is subject to change without prior
notice.
VDL301GL
max. 230 VAC / 50 Hz
30 mW
green
532 nm
semiconductor laser generator
3 ~ 5 kPPS
± 20°
music-activated
max. 30 W
F5A, 250 VAC (5 x 20 mm) (order code FF5N)
180 x 183 x 80 mm
2.15 kg
45°C
130°C
5 HQPOWER