Zhermack SQM 25 N Handbuch Für Gebrauch Und Wartung Seite 128

12
Figure
6
13
Figure
Because the machine has a water-fed cooling - washing system (always on and
controlled automatically by a solenoid valve) the water infeed tap must always be
open.
2
14
Figure
If, during work, the mains power suddenly goes off and then comes back on, the
machine shuts down automatically. To restart just press the green START button (3).
128 of 212
Fig. 12: Press the green START (3) button on the main
3
switch to start working.
Fig. 13: On model trimmer SQM 25 N, open the tap to
start feeding the water.
Water flow (which exits from a small tube at the
centre of the emery disc) is regulated via an adjuster
knob (6).
Fig. 14: Press the red STOP button (2) on the main
switch to stop work.
MAINTENANCE AND USE MANUAL
EN
SQM 25 N/SN - SAB 1000 G