How To Charge The Battery; Fitting And Removing The Battery - Hahnel MODUS 360RT Bedienungsanleitung

flashes reduces noticeably. The battery lifetime can vary substantially
depending on storage, operation conditions and exposure to unsuitable
environmental conditions.
Caution
• Do not short circuit the battery
• Do not drop battery into water or fire
• Do not drop or dismantle or subject the batteries to strong impact or
continuous mechanical shock
• Stop using the battery if the battery has any signs of damage or bulging
to housing and dispose of battery in accordance with the appropriate
local regulations

• How to charge the battery

The HLX-MD2 battery must be charged before use. Use only the
supplied MD2 charger to charge the battery. Connect the MD2 charger
to a USB adapter (min 5V 2 Amp) with the supplied Micro USB
Cable. To start the charge insert the HLX-MD2 battery into the MD2
charger and the red LED bar will start to illuminate, indicating that the
battery is charging. Green LED bar indicates full charge. Remove the
battery from charger when fully charged.

• Fitting and Removing the Battery

1. To fit the battery, push the battery
compartment cover downward
and open it.
2. According to the triangle sign on
the battery pack, insert it into the
compartment.
3. Now close the compartment
Battery
11