LG OCF100 Benutzerhandbuch Seite 11

3 Hang the TV assembled with the guide spacers on the wall mounting bracket attached to the wall by
aligning it with the grooves of the bracket in the direction of the arrow. Attach the lower part first, and
then attach the uppepart by slightly lifting up the set.
4 Insert the safety pin, which is provided in order to prevent the product desorption, in the direction of the
arrow while adjusting the position, and then completely fix the safety clip with fixing screw for safety clip.
If the safety pin is not fixed as shown in the figure, the product may fall.
- Check if the product is securely fixed by pulling ou the bottom of the TV.
When using cables or accessories that are not provided as accessories for this product, make sure to
keep a certain distance from the wall so that excessive force is not applied on cables or accessories.
- Pushing the product with excessive force may cause damage to the product.
Adjusting the Level of the Product
7
y If the product is not levelled after the installation, adjust the level using this screw.
(The product goes up or down, depending on the rotation direction of the screw.)
Safety Clip (Top) Fixing screw
Safety Clip (Top)
11
INSTALLATION
Assemble Safety Clip
between the Wall Mounting
Bracket and the Product