Installation; Attaching The Guide Spacer On The Tv - LG OCF100 Benutzerhandbuch

CAUTION
How to use the Rubber
y It is recommanded to install the bracket on a concreate wall.
y The product should be installed by a professional installer
designated by the retailer.

INSTALLATION

Attaching the Guide Spacer on the TV

1
y If the screws cannot be fully tightened when fixing the guide spacer with them, check the fixing depth of
the screws again and refer to the technical service manual.
< Procedures >
1 If any screws are installed into the mounting holes, please remove the screws.
2 Fix the guide spacers and the guide spacer fixing screws in the order shown in the figure.
- Place the product facing down on a table. To prevent scratches on the screen, place the product on
a cushion or a soft clothes on a flat surface.
- Tighten the screw until the set, guide spacers and screws are joined together securely and stop
tightening.
- Use a Phillips driver (manual or electric) to tighten the screws.
INSTALLATION
Attach the rubber here.
Guide Spacer (Top) Fixing Screw
Guide Spacer (Top)
Guide Spacer (Bottom) Fixing screw
Guide Spacer (Bottom)
7