Chain Pattern settings
These parameters are added only if you select
"CHAIN" as the rhythm pattern. Press the EN-
TER/REC button to access the Chain Parame-
ter Select screen. Use the √/® buttons to se-
lect the location (1--8) for which you want to
change the pattern, and use the value dial to
select the pattern (p.40) that will play at that lo-
cation. Use the L/M buttons to specify the num-
ber of times (1--8) that the selected pattern will
repeat.
Up to 8 patterns can be connected. If you want to
create a chain of 7 or fewer patterns, select "PTN
END" for the last pattern.
Press the ENTER/REC button to exit the Chain
Pattern Select screen.
Phrase Trainer mode
An audio source from the AUX jack or a phrase
you play on your bass can be recorded, and
played back repeatedly as a loop.
playing along with the repeating phrase.
You can slow down the playback speed without
affecting the pitch, which can help you to learn
difficult phrases.
If you select "JAM" as the recording mode, the
rhythm you specified in Rhythm mode will be re-
corded simultaneously with the bass input, and
looped.
1.Select the recording mode
Pattern location
In Play mode (except during bypass/mute or key
Number of repeats
lock), Rhythm mode, or AUX Pitch mode, press
the PHRASE TRAINER button to enter Phrase
Trainer mode.
When you enter this mode, the recording mode
and time select screen will appear, and the
Phrase Trainer icon will blink.
This provides a convenient way to practice by
19