www.heinner.com
4. Install the expansion pipe and chimney on the cooker hood. Afterwards, fix the outside
chimney bracket on the outside chimney, and be sure that the inside chimney can be
adjusted the height in it freely as well as fixing the expansion pipe. See Pic 3/Pic4.
Expansion pipe
5. Put the cooker hood on the hook. See Pic 5.
Pic 5
6. Adjust the height of the inside chimney to the position of the inside chimney bracket
and fix on it by screw, after adjusting the position, fix the body with safety screw.
Note: The two safety vents are positioned on the back housing, with diameter of
6mm.Lay the expansion pipe to the wall outlet. Fix the expansion pipe with the cable tie
on the wall-outlet.
Pic 4
Pic 3
190W, 50Hz, 220-240V
Inside chimney
Outside chimney
Bracket
Outside chimney
Pic 6
Cable tie
5