Access The Nas Via Ftp; Setup The Print Server; Activate The Print Server In The Nas Router - Topcom SKYR@CER WBR 7121gmr NAS Kurzanleitung

Setup the print server

6.2

Access the NAS via FTP

Enter ftp://192.168.1.1 in your web browser to access the ftp server. (192.168.1.1 is the
default local IP address of your NAS router)
Enter a username and password that you created to access the NAS by FTP.
If the username and password are correct you will get access to the folder of the USB storage that
you have set up.
If the Internet Accessible option is enabled, you can access the ftp server from a
remote site by use of the WAN IP address.
7 Setup the print server
7.1

Activate the print server in the NAS router

You can use the USB ports to connect to a USB printer (not supported for MFP-printer types, like
printer/scanner combo,....)
20