Remote Control; First Time Installation - Sharp HT-SB95 Bedienungsanleitung

Accessories
• 1x Remote control
• 1x User manual
• 1x EU power cord
• 2x Wall Bracket
• 1x Set of wall-mounting screws
Controls
4 5 6
2
1. LED Indicators
Red indicator: In STANDBY mode.
Green indicator: In AUX mode.
Orange indicator: In Optical mode.
Blue indicator: In Bluetooth mode.
White indicator: In HDMI ARC mode.
2. Remote Control Sensor
3. Wall bracket screws
4. button
Switch the unit between ON and STANDBY mode.
5. button
Select the play function.
6. button
Select the Bluetooth mode. Press and hold to
activate the pairing function in Bluetooth mode or
disconnect the existing paired Bluetooth device.
7. / PAIR
Play/pause/resume playback in Bluetooth mode. Press and
hold to activate the pairing function in Bluetooth mode
or disconnect the existing paired Bluetooth device.
8. +/- buttons
Increase/decrease the volume level.
Inputs/Outputs
1
1. OPTICAL Socket
Opticial input jack.
2. HMDI ARC Socket
Connect to a TV via HDMI cable.
3. SERVICE ONLY Socket
The USB socket is for service only. It is not designed to
charge smartphones, tablets or similar devices.
7 8
3
1
2 3 4 5
4. AUX Socket
Connect to an external audio device.
5. AC~ Socket
Connect power cord.

Remote control

1. – Switch the unit between ON and STANDBY mode.
2. MUTE – Mute or resume the sound.
3. Function buttons – Select the play function.
4. VOL+/VOL- – Increase/decrease the volume level.
5. / – Skip to previous/next track in Bluetooth mode.
6. PAIR – Press to activate the pairing function in Bluetooth mode or
disconnect the existing paired Bluetooth device.
7. – Play/pause/resume playback in Bluetooth mode.

First time installation

Remote control preparation
The provided Remote Control allows the unit to be operated from a
distance.
• Even if the Remote Control is operated within the effective range
6m, remote control operation may be impossible if there are any
obstacles between the unit and the remote control.
• If the Remote Control is operated near other products which gene-
rate infrared rays, or if other remote control devices using infra-red
rays are used near the unit, it may operate incorrectly. Conversely,
the other products may operate incorrectly.
FIRST-TIME USE: The unit has a pre-installed lithium CR2025 battery.
Remove the protective tab to activate the remote control battery.
EN