What Is Included In The Box; Remote Control Operation - Sharp HT-SBW202 Bedienungsanleitung

What is included in the box:

• 1 × Main unit
• 1 × Wireless subwoofer
• 1 × Remote control
• 2 × AAA battery
• 1 × User guide
• 1 × Quick start guide
• 1 × Warranty card
• 2 × Power cord
• 1 × Wall-mounting installation set
• 4 × Silicone pads for soundbar
Controls
2
5
1. Speaker
2. Display screen
3. LED standby indicator
4. IR sensor – for remote control
5. Standby button – Switch the unit between ON and STANDBY
mode.
6. Source button – Select the audio input to playback.
7. Volume +/- button – Increase/decrease the volume level.
1
3 4
6
7
Inputs/outputs
1
1. AC~ Socket – Connect power cord.
2. ARC/CEC Socket – Connect to a TVs HDMI (ARC) input via an HDMI
cable.
3. USB Socket – Used to connect a USB ash disk.
4. OPTICAL Socket – Digital optical input jack.
5. AUX IN Socket – Used to connect an external audio device.
Remote control
1. Switch the unit between ON and STANDBY mode.
2. Select the Bluetooth mode.
Press and hold to activate the pairing function in Bluetooth mode or
disconnect the existing paired Bluetooth device.
3.
Press repeatedly to select a signal source BT (Bluetooth), LINE, OPT
(Optical), ARC (HDMI) and USB mode.
4. +/- Increase/decrease the volume level.
5. / Skip to previous/next track in Bluetooth or USB mode.
6. Play/pause/resume playback in Bluetooth or USB mode. Hold down
this button for 3 seconds to disconnect Bluetooth.
7.
Mute or resume the sound.
8. BASS +/- Adjust bass level. This only changes CUST EQ settings.
9. TRE +/- Adjust treble level. This only changes CUST EQ settings.
10. EQ Press repeatedly to switch between EQ1, EQ2, EQ3 and CUST
equaliser modes.

Remote control operation

The provided remote control allows the unit to be operated from a
distance.
• Even if the remote control is operated within the e ective range of 6m,
remote control operation may be impossible if there are any obstacles
between the unit and the remote control.
• If the remote control is operated near other products which generate
infrared rays, or if other remote control devices using infra-red rays are
EN
2 3 4 5