Axis P8513 Installationsanleitung Seite 10

Page 10
AXIS Camera Management - multiple cameras/large
installations
AXIS Camera Management can automatically discover multiple Axis
devices, show connection status, manage firmware upgrades, and set IP
addresses.
Automatic discovery
1. Check that the camera is connected to the network and that power
has been applied.
2. Start AXIS Camera Management. When the camera appears in the
window, right-click the link and select Live View Home Page.
3. See page 11 for instructions on how to set the password.
Assign an IP address in a single device
1. Select one of the AXIS P85 Network Camera in AXIS Camera
Management and click the Assign IP button
Select Assign the following IP address and enter the IP address, the
2.
subnet mask, and default router the device will use.
Click OK.
3.
AXIS P85 Network Camera Series
.