Resetting A Method - struers Accutom-5 Gebrauchsanweisung

Resetting a Method

Accutom-5
Instruction Manual
If a method is not in use any more, it should be reset.
The parameters will change to default values, which can easily be
changed to a new method later on.
The method name will change to: EMPTY METHOD, telling you, that
you can copy to or modify in this method without replacing any
valuable data.

Select the method you want to reset.
SELECT CUTTING METHOD
1.UNNAMED METHOD
3.EMPTY METHOD
5.EMPTY METHOD
7.EMPTY METHOD
9.EMPTY METHOD
11.EMPTY METHOD
F1:COPY F2:INSERT F3:RESET F4:RENAME


Press ENTER
to make sure that you do not delete
valuable data.

Esc Press Esc to return to the above display.


Press F3:RESET.
F3

Do you want to reset this method ?
4. UNNAMED METHOD
ENTER: YES


Press ENTER
2.EMPTY METHOD
4.UNNAMED METHOD
6.EMPTY METHOD
8.EMPTY METHOD
10.EMPTY METHOD
12.EMPTY METHOD

to see the method and
RESET METHOD
ESC: NO

to reset the method.

37