Dressing - struers Accutom-5 Gebrauchsanweisung

Dressing

Dressing of Cut-off Wheels
32
Accutom-5
Instruction Manual
Diamond and CBN cut-off wheels may have to be dressed to open
up the wheel again and achieve maximum effect after cutting of
ductile materials. This can be done using the following routine:

Mount the cut-off wheel to be dressed.

Clamp the dressing stick in the sample holder and position it
correctly.
−
The dressing stick has to be in front of the wheel so that the
wheel is cutting slices of the dressing stick.

From the MANUAL FUNCTIONS MENU Press MENU


UP/DOWN
WHEEL.

MANUAL FUNCTIONS MENU
SAMPLE ROTATION
RECIRCULATION PUMP
DRESSING OF CUT-OFF WHEEL


Press ENTER
option.

to select DRESSING OF CUT-OFF

to activate the dressing