Software Settings; Configuration Menu - struers Accutom-5 Gebrauchsanweisung

Software Settings

Configuration Menu

Accutom-5
Instruction Manual
Switch on the power at the main switch located at the back of the
machine. The following display will appear briefly:
Afterwards the display will change to the same screen which was
shown before Accutom-5 was switched off, usually a cutting method.
When switching Accutom-5 on for the first time, the display to appear
should be the MAIN MENU. If the heading in the display is different,
press Esc, until the MAIN MENU appears. (A long beep can be
heard).
The MAIN MENU is the highest level in the menu structure. From
here you can go to configuration, manual functions and cutting
methods.
CUTTING METHODS
MANUAL FUNCTIONS
CONFIGURATION


Press MENU UP/DOWN

CONFIGURATION.


Press ENTER
CONFIGURATION menu.

CUT-OFF WHEELS
OPTIONS
MAIN MENU

to select

to activate the
CONFIGURATION
7