Screen Adjustments - iiyama AS4637UT Bedienungsanleitung

SCREEN ADJUSTMENTS

Adjust the image by following the procedure below to get the desired picture when selecting D-Sub input.
n The screen adjustments described in this manual are designed to set image position and minimize
flicker or blur for the particular computer in use. They are unlike the adjustments you would make
on a CRT monitor.
n The monitor is designed to provide the best performance at resolution of 1280 × 1024, but can not
provide the best at resolutions of less than 1280 × 1024 because the picture is automatically
stretched to fit the full screen or displayed at optimum resolution. It is recommended to operate at
resolution of 1280 × 1024 in normal use.
n Displayed text or lines will be blurred or irregular in thickness when the picture is stretched due to
the screen enlargement process.
n It is preferable to adjust the image position and frequency with the monitor controls, rather than the
computer software or utilities.
n Perform adjustments after a warm-up period of at least thirty minutes.
n Additional adjustments may be required after the Auto Set-up depending on the resolution or signal
timing.
n The Auto Set-up may not work correctly when displaying the picture other than the Test.bmp
(screen adjustment pattern). In this case, manual adjustments are required.
There are two ways to adjust the screen. One way is automatic adjustment for Clock, Phase and
Position. Another way is performing each adjustment manually.
Perform the Auto Set-up first when the monitor is connected to a new computer, or resolution is
changed. If the screen has a flicker or blur, or the picture does not fit in the display area after
performing the Auto Set-up, manual adjustments are required. Both adjustments should be made by
using the screen adjustment pattern (Test.bmp) obtained via the iiyama web site (http://
www.iiyama.com or http://www.iiyama.co.uk).
This manual explains adjustment under Windows 95/98/2000/Me/XP.
A Set the Full Screen feature to Off and display the picture at the optimum resolution.
B Enter the Test.bmp (screen adjustment pattern) to wallpaper.
n Consult the appropriate documentation for doing this.
NOTE
n Test.bmp is made at resolution of 1280 × 1024. Set the display position to center in the
wallpaper setting dialogue box. If you use Microsoft
of "Stretch desktop wallpaper to fit the screen".
[Adjustment pattern]
Zebra pattern
18 OPERATING THE MONITOR
® PLUS! 95/98 cancel the setting
Color bar
Picture frame
This is the image
displayed at 1280 × 1024.