Hatco Glo-Ray Installations- Und Bedienungshandbuch Seite 5

Figure 2. C-Leg Mounting
Locking
screw
Adjustable
Figure 3. Tubular Stand Mounting
®
Glo-Ray
Non-adjustable
Food Warmer
Figure 4. T-Leg End Mounting
Figure 5. T-Leg Alternate Mounting
UNDER SHELF
(see Figure 4 & 5)
When mounting the Glo-Ray under a shelf keep any
switches in the coolest possible location. A remote
control box is advised.
CAUTION
A minimum of 1.5" (3,8 cm) air gap between food-
warmer and underside of shelf is required.
If shelf has rolled or flanged edges that create an
overturned trough, mount Glo-Ray below lowest part
of rolled or flanged edge, using the optional
adjustable angle brackets (See Figure 6).
3
Locking
screw