Enabling Wi-Fi Direct To Share Through Smartshare - LG P710 Benutzerhandbuch

Connecting to Networks and Devices
1 Touch > Apps tab > Settings > Wi-Fi from the WIRELESS & NETWORKS.
2 Touch the Menu key
3 Select a device to connect from the scanned device list.
4 Touch OK.
NOTE: When you start Wi-Fi Direct, Wi-Fi connection will be disconnected.

Enabling Wi-Fi Direct to share through SmartShare

Wi-Fi Direct automatically scans nearby Wi-Fi Direct devices and the searched devices
are listed as they are found and you can select a specific device to share multimedia
data through Smart Share.
1 Touch > Apps tab > Settings > Wi-Fi from the WIRELESS & NETWORKS.
2 Touch the Menu key
3 Select a device to connect from the scanned device list.
CREATE GROUP – Touch to activate group owner mode, which enables the legacy
Wi-Fi devices to connect by scanning your phone. In this case you must enter the
password that is set in Password.
NOTE: When your phone becomes a group owner, it will consume more
battery power than when it is a client. Wi-Fi Direct connection does not
provide Internet service. Additional costs may be incurred when connecting
and using online services. Check data charges with your network provider.
36
> Wi-Fi Direct.
> Wi-Fi Direct.