RIDGID RP 330-B Betriebsanleitung Seite 3

RP 330-B, RP 330-C
Tools For The Professional
TM
5) Battery tool use and care
a. Recharge only with the charger specified by the manufacturer.
charger that is suitable for one type of battery pack may create risk of fire
when used with another battery pack.
b. Use power tools only when specifically designated battery packs.
of any other battery packs may create a risk of injury and fire.
c. When battery pack is not in use, keep it away from other metal objects,
like paper clips, coins, keys, nails, screws or other small metal objects,
that can make a connection from one terminal to another. Shorting the
battery terminals together may cause burns or a fire.
d. Under abusive conditions, liquid may be ejected from the battery;
avoid contact. If contact accidentally occurs, flush with water. If liquid
contacts eyes, additionally seek medical help. Liquid ejected from the
battery may cause irritation or burns.
6) Service
a. Have your power tool serviced by a qualified repair person using only
identical replacement parts. This will ensure that the safety of the power
tool is maintained.
b. If it becomes necessary to have the power supply cord replaced,
it must be replaced by the manufacturer or an official service
organization so as to avoid safety risks.
2.2 Marked parts of these operating instructions
Read and always observe the safety instructions in these operating
instructions. The safety instructions are marked like this:
Failing to observe an instruction marked with this sign may lead to
serious injury or death.
Failing to observe an instruction marked with this sign may damage
the machine or cause damage to property.
Marks any additional information or special instructions.
Lists
When the instructions are simply listed they are marked by a • before the line:
e.g.:
• 1st line
• 2nd line
Step-by-step instructions (where you have to do some-thing) are marked by
a flash
before the line:
X
1st step
X
2nd step
X
The sequence of the step numbers is binding.
3 Technical data
RP 330-C Pressing Tool
Rated power: ....................................................................670 W
Voltage: ..............................................................................230 V
Mains fuse: .......................................................................... 10 A
Insulation type
Machine monitoring: ....................................................electronic
Sound pressure level: ................................................ 71,5 dB(A)
Sound power level ..................................................... 82,5 dB(A)
Vibration level: ............................................................< 2.5 m/s
Power transmission: .....................................................hydraulic
Thrust at piston: ..................................................................32kN
Weight, including cable: .................................................... 4.6 kg
(Guideline values, subject to modification)
RP 330-B Pressing Tool
Rated power: ....................................................................490 W
Voltage: ................................................................................18 V
Machine monitoring: ....................................................electronic
Sound pressure level: ................................................ 71,5 dB(A)
Sound power level ..................................................... 82,5 dB(A)
2
Vibration level: ............................................................< 2.5 m/s
A
Power transmission: .....................................................hydraulic
Thrust at piston: ..................................................................32kN
Weight, including rechargeable battery: ............................ 4.4kg
Use
Capacity of lithium-ion
Rechargeable battery: ..............................................18 V/2.2 Ah
(Guideline values, subject to modification)
4. Device description and basic mode of operation
4.1 Basic mode of operation
The Pressing Tool operates electro-hydraulically. The hydraulic pump is
driven by means of an electric motor. The hydraulic fluid pressure acts on the
drive piston at one side, and the press rolls (5) are attached to the piston rod
of this piston. The press rolls produce the pressing action as the result of the
force being diverted via the cams of the press jaw (7).
4.2 Electronic monitoring and LED indicators
The Pressing Tool is monitored electronically in order to protect against
tampering and in order to ensure perfect pressing results. The status of any
malfunctions are indicated by light-emitting diodes (LEDs)(2).
The following are monitored:
• Retaining pin
• Pressing time
• Voltage/rechargeable battery capacity
• Servicing interval
• Operating temperature
Status indications after switching on the Pressing Tool
Connect the Pressing Tool to the mains
X
Slide the rechargeable battery into the Pressing Tool
X
Press the „ON-OFF" switch (1).
X
The LED (2) indicator lights while the „ON-OFF" switch is pressed in order to
check the function of the three LEDs.
„ON-OFF" switch
The machine can be switched on and off at any time with the „ON-OFF"
switch (except during a crimp cycle).
If the machine is not used while it is in ON state, the electronic circuitry
switches the machine to OFF state after 10 minutes.
4.3 Status indication
LED
Green
Red
Yellow
2
4.4 Mechanical construction of the Pressing Tool
See explanation on following page
5 Field of application
The Pressing Tool with RIDGID Standard Pressing Attachments or other
Standard Pressing Attachments available in the market is suitable for use
with all plumbing and heating systems up to size 54mm or even up to 108mm
if the system requires 32kN crimp force. The Pressing Tool with RIDGID
Standard VIEGA Attachtments is suitable for use with all VIEGA plumbing and
heating systems up to size 108mm.
Ridge Tool Company
Status Description
Glows Tool ON
230 V: Under voltage; 18 V: Battery too low.
Blinks
Recharge Battery.
Out of temperature range
Blinks
Jaws mountin pin not fully engaged.
Glows
Insert pin.
Machine is locked - service after 32,000
Blinks
cycles or after a malfunction.
Service indicator after 30,000 cycles.
Glows
Note: Tool will lock after 32,000 cycles.
2