Summer Infant SuperSeat Gebrauchsanleitung Seite 2

ASSEMBLY & USE: MONTAGE ET UTILISATION :
FR
ENG
MONTAGEM E UTILIZAÇÃO: MONTAGGIO E UTILIZZO:
PT IT
MONTAGE UND VERWENDUNG:
DE RU
A
B
D
E
G
J K
M
N
O
ENSAMBLAJE Y USO: COMPONENTS:
ES
ENG
MONTAGE EN GEBRUIK:
NL
:
MONTAŻ I OBSŁUGA:
PL
soft seat
:‫ﺍﻟﺗﺟﻣﻳﻊ ﻭﺍﻻﺳﺗﺧﺩﺍﻡ‬
AR
main seat
C
seat assembly
F
* child restraint straps are
** chair straps are taped to
chair straps** (2)
H I
SET-UP & USE:
Stage 1: Infant support seat (no assembly necessary)
Unbuckle child restraint straps and place child in seat. Secure buckle and adjust to a snug fit.
NOTE: For larger babies, soft seat can be removed by pulling straps through slots in soft seat.
L
Stage 2: Floor time activity seat
Step 1: Place the 4 tray sections upside down on the floor (Figure A).
Step 2: Fit the rear tray section to the right tray section and secure with 2 screws. Repeat process
with the left tray section (Figures B & C).
Step 3: Turn tray over and slide into position on the seat track exactly as shown in Figures D & E.
Step 4: Rotate the tray clockwise until the opening in the tray matches the opening in the seat
(Figure F).
Step 5: Slide front tray section onto activity tray by squeezing and releasing front latch to lock into
P
place (Figure G).
Step 6: Insert toy bar mounts into corresponding holes in the tray, making sure the spinners face
inwards (Figure H). Insert other two toys into locations shown (Figure I).
Step 7: Insert both sides of the toy bar into toy bar mounts (Figure J).
Step 8: Attach fabric toys through the loops in the toybar (Figure K).
Step 9: Unbuckle child restraint straps and place child in seat. Secure buckle and adjust to a snug fit.
Note: When placing baby in and out of seat, rotate tray so that front tray section is in front of the child.
child
restraint
straps*
activity tray (4 sections) toybar (1) soft toys (2)
pre-assembled on product.
the underside of the seat.
toys (4)
screws (4)