Led Indicator - AVer VC520 Bedienungsanleitung


Table
Use VC520
Make a Video Call
1. Make sure all devices (camera, hub, speakerphone, and laptop/PC) are well connected and hub is powered on.
2. Run your video application (Skype
3. Set the VC520 camera as the primary camera for your video application (refer to your video application user guide). You can now make your call.
4. The VC520 is a plug-and-play conference camera. The system requires no special drivers, but we do recommend installing the AVer PTZ app for a better
user experience. For information on how to install and use the AVer PTZ app, refer to the AVer PTZ App section in this user manual.
Phone in
To connect the VC520 speakerphone to your mobile phone as a hands free call device.
Use the included 3.5mm AUX cable to connect your mobile device to the "Phone In" jack on the speakerphone.
1.
Once the VC520 detects the proper connection to your mobile phone, When connection is successful, the "Cellphone" indicator will light up.
2.
Line in
To connect another VC520 speakerphone to extend the distance of speakerphone coverage to cover a room that has a diameter larger than 30' and increase
the volume:
1. Connect one side of the daisy chain cable (not included) to the speakerphone port (daisy chain).
2. Connect the other side of the cable to the speakerphone port on the other VC520 speakerphone.

LED Indicator


Camera
Status
Starting
Normal
Camera is not being used by the computer
Camera is not connected

Speakerphone( )
Status LED
Mute Solid Red
Unmute Solid blue
TM ® TM
, Microsoft Lync , Google Hangout, Cisco WebEx
English-4
® TM
, GoToMeeting , WebRTC, and etc.) on your laptop or PC.
LED
Flashing blue and camera head is rotating
Solid blue
Solid orange
Solid orange and camera head is down.

Cellphone( )
Status LED
Connect Light on
Disconnect Light off