Toshiba TCB-IFGSM1E Installationsanleitung Seite 20

TCS-NET GSM Phone Control Interface
LED LED status
LED1 OFF
LED2 ON
Blink
ON: Approx. 2 seconds
OFF: Approx. 0.5 seconds
Blink
ON: Approx. 0.5 seconds
OFF: Approx. 0.5 seconds
Blink
ON: Approx. 6 seconds
OFF: Approx. 0.5 seconds
LED3 ON
19-EN
TCB-IFGSM1E status
Note) LED1 lights as follows during BT operation:
During normal operation: ON
During initial processing: Blink (long interval)
During an error: Blink (short interval)
During stop: OFF
* Long interval: Repeat of ON for approx. 2 seconds and OFF for approx.
0.5 second
* Short interval: Repeat of ON for approx. 0.5 second and OFF for approx.
0.5 second
LED2 lights after power-on and reset.
It goes out when the PIN processing is completed on the modem side.
LED2 blinks at this interval when a PIN or PUK number is requested by the
modem after power-on or reset.
It goes out when the TCB-IFGSM1E state has changed.
LED2 blinks at this interval when modem is not connected or an modem
communication error has occurred
It goes out when the TCB-IFGSM1E state has changed.
LED2 blinks at this interval while the TCB-IFGSM1E is reading a PIN or
PUK number.
It goes out when the PIN or PUK number has been read.
Power-on
– 20 –
Installation Manual