Toshiba TCB-IFGSM1E Installationsanleitung Seite 18

Installation Manual
TCS-NET GSM Phone Control Interface
Deleting the setting permitted telephone number
Enter "DEL SETPERMIT ++**" (++: mobile phone number for test) in the Message Box, and click the SEND button.
Check that the following message appears in the textbox at the centre of the screen.
[SND] DEL SETPERMIT ++++
[SND]OK
Enter "READ SETPERMIT [ENTER]" in the Message Box, and click the SEND button.
Check that the following message appears again in the textbox at the centre of the screen.
[RCV] ++++++++ READ SETPERMIT NONE
(++++++++: indicates the characters of the registered NAME)
If you have set a PIN for testing and it is not used actually, follow the procedure below to delete it.
Deleting a PIN number
Enter "DEL PIN **" (**: registered PIN number) in the Message Box, and click the SEND button.
Check that the following message appears in the Text box.
[SND] DEL PIN ***
[SND]OK
Fixing the GSM Modem Location and Final Connection
Secure the GSM modem at the temporary location that was determined for the test run.
Connect the GSM modem to the TCB-IFGSM1E with the RS-232C cable, and secure the D-sub connectors of the
cable with screws.
Turn on the power unit supplied with the GSM modem.
Now the test run is completed.
– 18 –
17-EN