Changing The Mode Setting; Switching The Display Indicator; Using The Light On/Off Function; Checking The Filter Status - Philips AC3033 Benutzerhandbuch

Changing the mode setting

You can choose Auto mode, Turbo mode or the Sleep mode by touching the
button�
Auto mode ( ): In Auto mode, the dual-sensor sense the air quality in real-
time and the appliance automatically adjusts the fan speed in accordance
with the ambient air quality, the control panel can automatically adjust display
screen brightness according to the ambient light (fig i)�
Turbo mode ( ): In Turbo mode, the air purifier operates on the highest
speed (fig j)�
Sleep mode ( ): In Sleep mode, the air purifier operates quietly at a low
speed� After 3 seconds, the screen dims (fig k)�

Switching the display indicator

Note: The appliance displays IAI level by default�
• Touch the
button to switch display indicator among PM2�5 /Gas /IAI
(fig l & fig m & fig n)�

Using the light on/off function

With the light sensor, the control panel can automatically turn on, turn off or
dim according to the ambient light� The control panel will be off or dim when the
ambient light is dark� You can touch any button to wake up all lights� Then, if no
further operation, all lights will be off or dim again to match with the ambient
light (fig o)�
You can touch the light on/off button
control panel� Touch any button to wake up all lights (fig p)�

Checking the filter status

•
Touch the filter status check/reset
status (fig q)�
» The percentage of remaining service life of the filter displays on the
screen�
Icon color Filter life indication
Blue Optimal service life
Blue-purple Good service life
Purple-red Service life almost reaches the end
Red Service life ends, replace the filter
Note: The appliance goes back to normal display if no operations after
3 seconds�
manually to turn off all lights and the
button to check the filter service life
Display (%)
16-100
9-15
4-8
0-3
EN
9