Kenwood BL220 series Bedienungsanleitungen Seite 5

4 Fit the filler cap to the lid.
a glass goblet - Fit the lid by
pushing down until secure.
b plastic goblet - Fit the lid onto
the goblet and turn clockwise until it
clicks.
5 Place the blender onto the power
unit and turn clockwise until it
clicks .
The appliance won't work if
the blender is incorrectly
fitted.
6 Select a speed (refer to the
recommended speed chart).
hints
To blend dry ingredients - cut into
pieces, remove the filler cap, then
with the machine running, drop the
pieces down one by one. Keep your
hand over the opening. For best
results empty regularly.
The processing of spices is not
recommended as they may damage
the plastic parts.
When making mayonnaise, put all
the ingredients, except the oil, into
the blender. Remove the filler cap.
Then, with the appliance running,
add the oil slowly through the hole in
the lid.
Thick mixtures, e.g. pâtés and dips,
may need scraping down. If the
mixture is difficult to process, add
more liquid.
to use your mill
1 Put your ingredients into the jar. Fill it
no more than half full.
2 Fit the sealing ring
unit - ensuring the seal is located
correctly in the grooved area.
Leaking will occur if the seal
is damaged or incorrectly
fitted.
3 Turn the mill blade assembly upside
down and screw onto the mill jar
Refer to the graphics on the
underside of the blade unit as
follows:-
- unlocked position
- locked position
The mill will not operate if
incorrectly assembled.
4 Place the mill onto the power unit
and turn until it clicks
5 Select a speed or use the pulse
control.
6 After milling, you can replace the
blade assembly with the mill lid.
5
(if supplied)
into the blade
.
.