Configuration - Philips LFH 9160 Benutzerhandbuch



Configuration

Once the LAN Docking Station is connected to the network, it can be configured using a simple
HTML interface from any HTML4-compliant Web browser.
There is also an Administration Tool that can be used to manage and update the configuration
settings of several LAN Docking Stations (batch update). See
Tool on page 18 for more information.
To open the LAN Docking Station configuration interface, follow these steps:
Open a Web browser on your PC.
1
Enter the IP address of the LAN Docking Station that you want to configure into the address
2
field of the Web browser.
The Web browser prompts you for a user name and password. Leave the user name field
3
empty and enter the administrator password. If you are accessing the configuration interface
for the first time, the default password is ‚administrator'.
The configuration interface appears with the following panels: Status, IP settings, FTP
4
settings, Automatic file upload, Comments, Firmware upgrade and Administrator password.

LAN Docking Station Administration
User manual