3.11 Resetting To Factory Defaults - Philips LFH 9160 Benutzerhandbuch

If your server requires authentication to
7
download the firmware file, enter the name
of the user account, the password, and
confirm the password. Otherwise leave the
USERNAME, PASSWORD
PASSWORD text fields empty.
Enter the full path and file name to the .bcd
8
file of the new firmware into the
SERVER text field.
Press the UPGRADE NOW
9
the upgrade process.
D Note: Once the firmware upgrade is
complete, the LAN Docking Station will
restart. You may get disconnected from the configuration interface.

3.11 Resetting to factory defaults

Follow these steps to reset the LAN Docking Station to its factory default configuration settings:
Warning: When you reset the LAN Docking Station, all your configuration settings will be lost.
B
Make sure that the LAN Docking Station is connected to the main power supply using the
1
Philips power supply.
Slide a Digital pocket Memo 9600 or 9620 into the docking slot of the LAN Docking Station.
2
Press and hold the
3
simultaneously for 3 seconds.
The configuration settings of the LAN Docking Station will reset to their factory defaults,
4
and the LAN Docking Station will restart. The IP address of the LAN Docking Station will be
set to 192.168.109.1 (subnet mask 255.255.255.0).
Open the LAN Docking Station configuration interface by entering its IP address in your
5
Web browser.
You will be prompted to enter a user name and a password. Leave the user name field empty
6
and enter ‚administrator' in the
Change the IP address of the LAN Docking Station according to your network policy. See
7
Changing the IP address of the LAN Docking Station
User manual
and CONFIRM
PATH ON
button to start
FUNCTION and the
PASSWORD
MENU button on the Digital Pocket Memo
field.
on page 13 for more information.
1