Philips LFH 9160 Benutzerhandbuch Seite 28

Error logs
How to enable error logging on the LAN Docking Station
When access to the LAN Docking Station is possible using the configuration interface, type
http://ip.addr.of.dock/web/log.txt
logging file.
When access to the LAN Docking Station is not possible through the web browser:
Go to the LAN Docking Station and make sure it is powered.
1
Disconnect the LAN cable connected to the LAN Docking Station.
2
Dock a Digital Pocket Memo into the LAN Docking Station.
3
To copy the error log.txt file to the memory card press the
4
BUTTON (left hand side below the LC-Display) on the Digital Pocket Memo simulataneously.
Connect the Digital Pocket Memo to a PC using a USB cable and view the log.txt file available
5
in the root directory of the memory card.
Error log ‚Can not download from server – wrong filename or access denied'
• The error indicates that the download of an upgrade file from the FTP server failed.
Administration Tool
A LAN Docking Station does not show up in the Administration tool overview list
The reason is most likely that the LAN Docking Station was unable to connect to the FTP server.
Check the following:
• Verify if the LAN Docking Station is connected to the main power supply.
• Verify if the LAN Docking Station is connected to the network.
• Is the IP address of the LAN Docking Station configured properly?
• Are the FTP settings of the LAN Docking Station the same as those in the Administration tool?
Disclaimer and Notices
Philips performs extensive testing with the most popular configurations. However, since PC add-
ons and device drivers are updated continually, conflict-free operation cannot be guaranteed.
The CE mark confirms that the device corresponds to the relevant guidelines of the
European Union.
The cardboard used for packaging can be recycled. This electronic device contains
recyclable material.
2
in the address field of the Web browser to open an error text
MENU button and the LEFT SMART
User manual